Ricoh C2828 Function Manual page 810

8. Specifying the Extended Security Functions
Category
Security / IPsec
*1 You can configure "Permit SSL/TLS Communication" using Control panel.
Settings when IPsec is not available
If IPsec is not available on your network, we recommend you configure the settings shown in the following
table.
• Control panel settings to configure when IPsec is not available
Feature Setting Menu
System Settings
System Settings
*1 You can configure "Permit SSL/TLS Communication" using Web Image Monitor.
• Web Image Monitor settings to configure when IPsec is not available
8
Category
Security / IPsec
Security / SSL/TLS
Security
Address Book / E-mail
*1 You can configure "Permit SSL/TLS Communication" using Control panel.
• Procedures when IPsec is Unavailable
The following procedures enhance the security of the machine's data when it is travelling on a network
where IPsec is unavailable. Administrators must inform users to carry out these procedures.
• Fax
224
Settings
Encryption Key Auto
Exchange Settings /
Security Level
Tab Settings
Interface
IPsec
Settings
Interface Permit SSL/TLS
Settings Communication *1
Settings
SNMPv3 Function
Permit SSL/TLS
Communication *1
S/MIME
User Certificate
Setting Value
Authentication and High Level Encryption
Setting Value
Inactive
Ciphertext Only
Setting Value
Inactive.
Ciphertext Only
"Encryption Algorithm": [3DES-168bit]
S/MIME requires you to specify a User
Certificate.
S/MIME requires you to specify a User
Certificate.