Ricoh C2828 Function Manual page 426

4. Monitoring and Configuring the Printer
Error: Ethernet Board
Error: HDD Board
Error: Media Link Board
Error: Memory Switch
Error: Optional Font
Error: Optional RAM
4
Error: Parallel I/F Board
Error: PDL
Error: Rem. Certificate Renewal
Error: USB Board
Error: USB Interface
Error: Wireless Board
Error: Wireless Card
Exceed Booklet Stapling Limit
Exceed Stapling Limit
Full: Finisher
Full: Finisher Booklet Tray
Full: Finisher Shift Tray
Full: Finisher Shift Tray 1, 2
Full: Finisher Upper Tray
Full: Hole Punch Receptacle
Full: Internal Shift Tray
208
Messages Description
An Ethernet board error has occurred.
A hard disk drive board error has occurred.
An error has occurred on the File Format Converter.
A memory switch error has occurred.
An error has occurred in the font file of the machine.
An error has occurred in the optional memory unit.
An error has occurred in the parallel interface.
An error has occurred in the page description
language.
An error has occurred in the remote server renewal.
An error has occurred in the USB interface board.
An error has occurred in the USB interface.
An error has occurred in the wireless interface
board or IEEE 802.11 interface unit.
Wireless card is not inserted during start up, or the
IEEE 802.11 interface unit or the wireless card is
taken out after start up.
The printing has exceeded the stapling limit of the
booklet finisher.
The printing has exceeded the stapling limit.
Finisher tray is full.
Booklet tray of Finisher is full.
Shift tray of Finisher is full.
The shift tray 1 and 2 of Finisher are full.
Finisher's upper tray is full.
Punch Chip receptacle for hole punch is full.
The internal shift tray is full.