Ricoh C2828 Function Manual page 253

SMB Computer Name
Specify the SMB computer name.
Enter the computer name using up to 15 characters.
"*+,/:;<>=?[\]|. and spaces cannot be entered.
Do not set a computer name starting with RNP and rnp.
Use uppercase letters for alphabets.
SMB Work Group
Specify the SMB work group.
Enter the computer name using up to 15 characters.
"*+,/:;<>=?[\]|. and spaces cannot be entered.
Use uppercase letters for alphabet.
Ethernet Speed
Set the access speed for networks.
The default setting is [Auto Select].
Select a speed that matches your network environment. [Auto Select] should usually be selected.
10Mbps Half
Duplex
10Mbps Half
Duplex
10Mbps Full
Duplex
100Mbps
Half Duplex
100Mbps Full
Duplex
Auto Select
IEEE 802.1X Authentication for Ethernet
Specify IEEE 802.1X authentication for Ethernet.
The default setting is [Inactive].
For details about IEEE 802.1X authentication, see "Configuring IEEE 802.1X (WPA/WPA2)".
Restore IEEE 802.1X Authentication to Defaults
You can return the IEEE 802.1X authentication settings to their defaults.
10Mbps Full 100Mbps
Duplex Half Duplex
Interface Settings
100Mbps Full
Auto Select
Duplex
1
35