Ricoh C2828 Function Manual page 672

3. Users/Authentication and its Application
Setting Item
Lockout Release Timer
Lock Out User for
3
Lockout release privileges
Administrators with unlocking privileges are as follows.
general user
user administrator, network administrator,
file administrator, machine administrator
supervisor
Specifying the User Lockout Function
This can be specified by the machine administrator using Web Image Monitor.
1. Open a Web browser.
2. Enter "http://(the machine's IP address or host name)/" in the address bar.
When entering an IPv4 address, do not begin segments with zeros. For example: If the address is
"192.168.001.010", you must enter it as "192.168.1.10" to connect to the machine.
The top page of Web Image Monitor appears.
3. Click [Login].
The machine administrator can log on.
Enter the login user name and login password.
4. Click [Configuration], and then click [User Lockout Policy] under "Security".
The User Lockout Policy page appears.
5. Set "Lockout" to [Active].
6. In the drop down menu, select the number of login attempts to permit before applying
lockout.
86
Description
Specify whether or not
to cancel lockout after
a specified period
elapses.
Specify the number of
minutes after which
lockout is canceled.
Locked out User
Setting Values
• Active
• Inactive
1-9999 min. 60 min.
Unlocking administrator
user administrator
supervisor
machine administrator
Default Setting
• Inactive