Ricoh C2828 Function Manual page 825

Error Code
L0406-201
L0406-202
L0406-203
L0406-202
L0406-203
L0406-202
L0406-203
Cause
Authentication is disabled in the
LDAP server settings.
1. There is an error in the LDAP
authentication settings, LDAP
server, or network
configuration.
2. A login user name or
password error occurred.
3. There is an error in the simple
encryption method.
Authentication Does Not Work Properly
Solution
Change the LDAP server
settings in administrator tools, in
"System Settings".
1. Make sure that a connection
test is successful with the current
LDAP server configuration.
If connection is not successful,
there might be an error in the
network settings.
Check the domain name or
DNS settings in "Interface
Settings".
2. Make sure the LDAP server is
specified correctly in the LDAP
authentication settings.
3. Make sure the login name
attribute is entered correctly in
the LDAP authentication
settings.
4. Make sure the SSL settings
are supported by the LDAP
server.
1. Make sure the login user
name and password are
entered correctly.
2. Make sure a useable login
name is registered on the
machine.
Authentication will fail in the
following cases:
If the login user name contains
a space, colon (:), or quotation
mark (").
If the login user name exceeds
128 bytes.
1. Authentication will fail if the
password is left blank in simple
authentication mode.
9
239