Ricoh C2828 Function Manual page 156

8. Various Scan Settings
• When scanning originals using [Custom Size], you cannot enter specific values in [Original Size] and
[Start Position]. To configure the scan area, specify [Scan Area] and [Start Position] first, and then
[Original Size].
How to set originals to scan them by custom size
This section explains how to place originals you want to scan at custom size.
Original Orientation setting
Under [Original Orientation], select [
display [Original Orientation], on the initial scanner screen, press [Original Orientation]. For details,
see "Setting of Original Feed Type".
Placing an original
Place originals face up in the ADF; face down on the exposure glass.
Original Orientation is [
Placing an original in the ADF
8
Placing an original on the exposure
glass
Align the original, turn it rightward
or leftward, and then place it face
down on the exposure glass.
Original Orientation is [
Placing an original in the ADF
154
] or [
]
Item
]
Item
] according to the orientation of your original. To
Description
BHE006S
BHE004S
Description
BHE005S