Ricoh C2828 Function Manual page 155

Orientation and placement of original
In the orientation in the ADF.
In the orientation on the exposure
glass.
Scan settings on the custom size setting screen
1. Original Size (X1 and Y1)
Specify the original's entire size.
Enter the actual values in [X1] and [Y1] while referring to "How to measure sizes", and then press the [ ] key.
2. Start Position (X2 and Y2)
Specify the scanning start position.
Enter the actual values in [X2] and [Y2] while referring to "How to measure sizes", and then press the [ ] key.
3. Scan Area (X3 and Y3)
Specify sizes of the area you want to scan.
Enter the actual values in [X3] and [Y3] while referring to "How to measure sizes", and then press the [ ] key.
Measuring method for scanning the "R" section
BAO015S
BAO016S
BAP043S
Scan Settings
8
153