Ricoh C2828 Function Manual page 486

5. Registering Addresses and Users for Facsimile/Scanner Functions
To program the SUB Code
This section describes how to program the SUB Code.
1. Press [Adv. Features], and then press [SUB Code].
2. Press [Change] under "TX SUB Code".
3. Enter the SUB Code, and then press [OK].
4. To enter a password, press [Change] under "Password (SID)".
5. Enter a password using the number keys, and then press [OK].
6. Press [OK].
To program the SEP Code
This section describes how to program the SEP Code.
5
1. Press [Adv. Features], and then press [SEP Code].
2. Press [Change] under "RX SEP Code".
3. Enter a SEP Code using the number keys, and then press [OK].
4. To enter a password, press [Change] under "Password (PWD)".
5. Enter a password using the number keys, and then press [OK].
6. Press [OK].
To set the International TX Mode
This section describes how to set the International TX Mode.
1. Press [Change] under "International TX Mode".
2. Select [Off] or [On], and then press [OK].
To select the fax header
This section describes how to select the fax header.
1. Press [Change] under "Fax Header".
2. Select [1st Name] or [2nd Name], and then press [OK].
To set label insertion
This section describes how to set label insertion.
268