Ricoh C2828 Function Manual page 87

Switching to the WSD Scanner Screen
This section explains how to switch from the screen that is currently displayed to the WSD scanner screen.
When the E-mail screen, Scan to Folder screen, or network delivery screen is displayed, you can use the
following procedure to switch to the WSD scanner screen.
1. Press [Swtch Dest.List].
The [Switch Destination List] screen appears.
2. Press [WSD], and then press [OK].
The WSD scanner screen appears.
• You cannot switch the screen while e-mail or other destinations are being specified. To clear a
specified destination, display the destination in the destination field of each screen, and then
press the [Clear/Stop] key.
• If you are not using the network delivery function, [WSD Dest.] is displayed instead of [Swtch
Dest.List]. Press [WSD Dest.] to switch to the WSD scanner screen.
• [Swtch Dest.List] or [WSD Dest.] is displayed only when the WSD scanner function is set to [On]
using Web Image Monitor. For details about making this setting, see "Preparation for Sending
files Using WSD".
• p.78 "Preparation for Sending Files Using WSD"
Switching to the WSD Scanner Screen
3
85