Ricoh C2828 Function Manual page 450

4. Monitoring and Configuring the Printer
Established SPX Connection with PServer,
(RPSocket=<socket number>,
connID=<connection ID>)
exiting
Exit pserver
Frametype=<frame type name>
4
IEEE 802.11 Card does NOT support WPA .
IEEE 802.11 Card Firmware REV.<version>
IEEE 802.11 current channel <channel number>
IEEE 802.11 MAC Address = <MAC address>
IEEE 802.11 SSID <ssid> (AP MAC Address
<MAC address>)
IEEE 802.11 <communication mode> mode
(IKE phase-1) mismatched authentication type:
local=<authentication type 1>
remote=<authentication type 2>
(IKE phase-1) mismatched encryption type:
<encryption algorithm 1> remote=<encryption
algorithm 2>
(IKE phase-1) mismatched DH group: local=<DH
group number 1> remote=<DH group number 2>
232
Message Problem and solutions
Connection to the print server was established
when the remote printer went online.
The lpd service has ended and the system is exiting
the process.
The print server function was disabled because the
necessary print server settings have not been made.
The specified frame type name <frame type name>
is for NetWare use.
A wireless card that does not support WPA is
installed. Install a wireless card that supports WPA.
Displays the version number of the 802.11 card's
firmware.
Displays the current channel number of the active
wireless card (in ad hoc and infrastructure mode).
Displays the MAC address of the wireless interface.
The MAC address and SSID of the access point are
connected in infrastructure mode.
Displays IEEE 802.11 communication mode.
This machine's <authentication type> in IKE phase
1 does not match the communicating host's
<authentication type 1>, Make sure this machine's
<authentication type 2> matches that of the
communicating host.
This machine's ISAKMP SA Oakley group
<encryption algorithm 1> in IKE phase 1 does not
match the communicating host's ISAKMP SA
Oakley group < encryption algorithm 2>, Make
sure this machine's ISAKMP SA Oakley group
matches that of the communicating host.
This machine's ISAKMP SA Oakley group <DH
group number 1> in IKE phase 1 does not match
the communicating host's ISAKMP SA Oakley