Mechanical Adjustment; Adjusting The Paper Reference Position - Konica Minolta bizhub C350 Service Manual

Hide thumbs Also See for bizhub C350:

Table of Contents

PC-101/PC-201 Field Service Ver2.0 Sep. 2004

Mechanical adjustment

• Make this adjustment after any of the following procedures has been performed.

When the PH Unit has been replaced.

When the image on the print is offset in the FD direction.

When a faint image occurs on the leading edge of the image.

1. Display Tech. Rep. Mode.

☞ For details of how to display the

Tech. Rep. Mode screen, see the

Adjustment/Setting of the main unit

service manual.

2. Touch "Machine Adjust".

4348fs3603e1

3. Touch "PRT Area".

4348fs3604e0

4. Touch "Left Margin".

4348fs3605e0

5. Touch "3rd" and then press the

"Start" key.

6. A test print will be produced.

4348fs3510e0

Mechanical adjustment

Table of Contents