How To Reset - Konica Minolta bizhub C350 Service Manual

Hide thumbs Also See for bizhub C350:

Table of Contents

Trouble code

Elevate Mechanism malfunctions • The Exit Tray Home Position Sensor (PI9-FN) is not

Backup RAM malfunction

• The Punch Unit detects punch-related malfunctions and notifies the Finisher of

any malfunction detected.

How to reset

• Press the Trouble Reset Switch on the Tech. Rep. Setting Switches Board to reset the

following malfunctions: scanner-related malfunctions, fusing-related malfunctions, expo-

sure lamp-related malfunctions and C3FFF.

• For any other malfunctions, open and close the Front Door or turn OFF and ON the

Power Switch.

• Before starting the troubleshooting in relation to the Punch Mechanism C0B7X, be

sure to turn OFF the Power Switch of the main unit.

blocked even after the lapse of a given period of time

after the tray has started moving up.

• An encoder clock input is not detected within a given

period of time during operation of the tray.

• Data written in the Backup Memory differs from what is

recorded in it and writing operation is not correctly per-

formed even with two retry sequences (a total of three

writing sequences).

FS-601 Field Service Ver2.0 Sep. 2004

Table of Contents