Cleaning Brush Motor - Konica Minolta bizhub C350 Service Manual

Other
[20]
[22]
[25]
[27]
[26]
4.3.44

Cleaning Brush Motor

2-86
bizhub C350 Field Service Ver2.0 Sep. 2004
16. Remove the E-ring [19] and Shaft
[20], and remove the Gear [21].
[19]
[21]
4036fs2130c1
17. Remove two E-rings [22], and
remove the Cover [23].
[23]
4036fs2131c1
18. Remove the E-ring [24], and remove
the Gear [25].
[24]
4036fs2132c1
19. Remove the two Screws [26], and
remove the Fusing Pressure Roller
Pressure/Retraction Motor [27].
4036fs2133c1
1. Remove the High Voltage Unit/1
mounting plate.
☞ See the procedures 1 to 4 of 2-80
"1st Image Transfer Pressure/
[1]
Retraction Motor".
2. Remove the Connector [1].
4036fs2134c0