3.11 Settings In The Admin. Mode; Admin. Set - Konica Minolta bizhub C350 Service Manual

Utility Mode

3.11 Settings in the Admin. Mode

• Entering the 8-digit administrator number set in the Admin. Mode will allow you to enter the Admin.
Mode (default value: 00000000).
3.11.1

Admin. Set.

A. 1/4
(1) Top Erase
Functions • To set the leading edge erase amount of the paper.
Use • To change the width of the area not printed along the leading edge of the paper
Setting/Procedure • The default setting is 5 mm.
(2) Disable Sleep Mode
Functions • To display the option of "No" for the Sleep setting screen available from User's
Use • To display the option of "No" for the Sleep setting
Setting/Procedure • The default setting is No.
(3) A3 Wide Paper Size (Over Size Paper selection)
Functions • Select paper size of A3 Wide. (Over Size Paper)
Use • To change the full bleed paper size
Setting/Procedure • The default setting is 305 × 457 mm or 12 × 18.
Metric areas: 311 × 457 mm 305 × 457 mm
Inch areas : 12-1/4 × 18 12 × 18
(4) Locked Jobs Auto Delete Time
Functions • To set the period of time, at the end of which locked jobs are automatically
Use • To change the period of time, at the end of which locked jobs are automatically
Setting/Procedure • Use the 10-Key Pad to enter the time.
• The default setting is No.
(5) Skip Volume Track (E. K. C.) Error
Functions • This function is used to specify whether or not other jobs can skip a job that was
Use • Used to specify whether or not other jobs can skip a job that was stopped
Setting/Procedure • The default setting is No.
3-16
5 mm 7 mm
Choice 1.
Yes No
deleted
Locked job: Job to be printed only when a valid password is entered
deleted
No (1 to 99 hour)
stopped because the maximum number of copies has been reached for the
account.
Yes No
bizhub C350 Field Service Ver2.0 Sep. 2004