[Time Adjustment Setting] - Konica Minolta bizhub 225i User Manual

4

[Time Adjustment Setting]

Specify the NTP used to obtain the date and time information.
Configure the settings and click [Apply] to apply the change.
Item
[Time Adjustment Setting]
[Auto IPv6 Retrieval]
[NTP Server Address]
[Port No.]
[Auto Time Adjustment]
[Polling Interval]
4-14
Description
Select [enable].
To automatically obtain the address of the NTP server in IPv6, se-
lect [enable].
Other items must be configured as shown below in advance.
• [Network Tab] - [IPv6 Configuration] - [Use IPv6]: [ON]
• [Network Tab] - [IPv6 Configuration] - [Use DHCPv6]: [ON]
• [System Tab] - [Maintenance] - [Date/Time Setting] - [Time Ad-
justment Setting] - [Time Adjustment Setting]: [enable]
• [System Tab] - [Maintenance] - [Date/Time Setting] - [Time Ad-
justment Setting] - [Auto IPv6 Retrieval]: [enable]
• [System Tab] - [Maintenance] - [Date/Time Setting] - [Time Ad-
justment Setting] - [NTP Server Address]: null
Enter the NTP address in IPv4.
If the DNS server has already been configured, you can enter the
FQDN name instead.
Enter the port number of the NTP server.
The initial setting is [123].
To automatically connect to the NTP server and correct the time,
select [enable].
When automatically correcting the time, specify its interval on a
hour basis.
Administrator mode
bizhub 225i
4.3