Mechanical Adjustment; Adjustment Of The Scanner Motor Timing Belt - Konica Minolta bizhub C350 Service Manual

bizhub C350 Field Service Ver2.0 Sep. 2004
6.

Mechanical adjustment

6.1

Adjustment of the Scanner Motor Timing Belt

This adjustment must be made in the following case:
• The Scanner Motor Assy has been removed.
• The Scanner Drive Cables have been rewound.
1. Remove the IR Rear Cover.
2. Remove 16 screws and the reinforcement frame.
[2]
[2] [3]
3. Loosen the three screws that secure
[1]
4036fs3036c0
4. With the Scanner drive gear set
[4]
5. Tighten the three screws [2] to fix the
[2]
4036fs3037c0
Mechanical adjustment
the Scanner Motor mounting bracket
[1].
screw [2] located on the right-hand
side as shown on the left, slide the
Scanner Motor Assy [3] to the left
and check that it is returned to the
original position by the tension of the
spring [4]. Perform this step three
times.
Scanner Motor Assy into position.
3-103