Hard Disk; Display Pm Parts Lifetime; Lct Paper Size; Chinese Paper Size - Konica Minolta bizhub C350 Service Manual

TECH. REP. MODE
4.8.11

Hard Disk

Functions • To configure the copier as necessary when a hard disk is mounted.
Use • Use when the hard disk is mounted.
Setting/Procedure • The default setting is Unset.
✽ When the setting has been changed, turn OFF and ON the Power Switch.
4.8.12

Display PM parts lifetime

Functions • To select whether or not to give the display of PM parts lifetime
• Applicable units:
Use • Use to select not to give the display of PM parts lifetime.
Setting/Procedure The default setting is Yes.
4.8.13

LCT Paper Size

Functions • To set the paper size for the LCT
Use • Use to change the paper size for the LCT.
Setting/Procedure The default setting depends on the setting made for the applicable marketing area.
A4
Letter : US, Others4
4.8.14

Chinese Paper Size

Functions • To set the paper size for Chinese paper
Use • Use to change the paper size for the Chinese paper.
Setting/Procedure • The following sizes are the default setting.
8K: 390 × 270 mm 16K 270 × 195 mm : US, Europe, Others1/2/4, Japan
8K: 390 × 267 mm 16K 267 × 195 mm : Others3
4.8.15

US Zoom Setting

• This option becomes available only when "US" is selected for "Marketing Area."
Functions • To change the fixed zoom ratios
Use • Use to change the fixed zoom ratios.
Setting/Procedure • The default setting is 0.733.
3-74
Set Unset
PM parts lifetime display: An entire screen warning is given when the service life
of a specific unit has been reached, prompting the
user to replace the part.
Transfer Belt Unit, Fusing Unit, Paper Powder Filter/Ozone Filter,
Transfer Roller Unit, IU (C, M, Y, Bk)
Yes No
: Europe, Others1/2/3, Japan
0.733 0.772
bizhub C350 Field Service Ver2.0 Sep. 2004