Other
[11]
[10]
[10]
2-62
bizhub C350 Field Service Ver2.0 Sep. 2004
8. Remove the Screw [6] and Connec-
tor [7].
[7]
[6]
4036fs2618c0
9. Remove the Connector [8].
[8]
4036fs2089c2
10. Turning the IU (C, M, Y, Bk) drive hub
[9], push it into the locked position (at
[9]
four places).
NOTES
• During the locking procedure, use
care not to touch the LED surface.
• Should the LED surface be
touched, clean it with the LED
4036fs2521c1
Cleaning Jig.
11. Remove four screws [10] and slide
out the LPH Unit [11].
NOTE
• When the LPH Unit is to be
replaced, remove the ATDC Sensor
from the old LPH Unit and remount
it on the new one. This step is not,
however, necessary if the IU is
4036fs2522c1
replaced at the same time.
☞ For replacement of ATDC Sensor,
see 2-92.