Atdc Sensor Y/M/C - Konica Minolta bizhub C350 Service Manual

Other
[16]
4.3.47

ATDC Sensor Y/M/C

[1]
2-92
bizhub C350 Field Service Ver2.0 Sep. 2004
11. Press the LPH Assy [16] down into
the locked position.
NOTES
• Select "Tech. Rep. Mode"
"Machine Adjust"
and change the value of "LPH
Rank" to "1".
• When the LPH Unit has been rein-
stalled, be sure to run "Stabilizer"
available from "Image Adjust" of
the Tech. Rep. mode.
4036fs2633c0
1. Remove the LPH Unit.
[3]
☞ 2-61
2. Remove two screws [1], unplug the
connector [2], and remove the ATDC
[2]
Sensor.
NOTE
• When the LPH Unit has been rein-
stalled, be sure to run "Stabilizer"
4036fs2544c0
available from "Image Adjust" of
the Tech. Rep. mode.
→
→
"LPH Rank"