Separation Roller 2 - Konica Minolta bizhub C350 Service Manual

Periodical check
[3]
[2]
[5]
[8]
[6]
1.5.3

Separation Roller 2

[2]
2-8
bizhub C350 Field Service Ver2.0 Sep. 2004
4036fs2014c1
[1]
[3]
4036fs2015c1
[7]
[4]
4036fs2016c1
[10]
[9]
4036fs2017c0
[1]
4036fs2018c0
3. Using a soft cloth dampened with
alcohol, wipe the Separation Roller
[3] clean of dirt.
B. Replacing Procedure
1. Slide out the Tray 1.
2. Remove two screws [1] and the Sep-
aration Roller mounting bracket Assy
[2] and two reinforcement plates [3].
NOTES
• Receive by hand the reinforcement
plate that will come off position when
the screws are removed.
• When reinstalling the reinforcement
plate, make sure that it is doweled into
position.
3. Take off the rubber stopper [4], shaft
[5], spring [6], and guide plate [7] to
remove the Paper Separation Roller
fixing bracket Assy [8].
4. Snap off the E-ring [9] and the Paper
Separation Roller Assy [10].
5. To reinstall, reverse the order of
removal.
6. Select "Tech. Rep. Mode"
→
"Counter" "Life" and clear the
count of "1st."
A. Cleaning Procedure
1. Slide out the Tray 2.
☞ 2-58
2. Remove the Multi Bypass unit.
3. Remove the Screw [1], and the Rein-
forcement plate [2].
→