Konica Minolta bizhub C350 Service Manual page 147

Utility Mode
C. 4in1 Copy Order
Functions • To select the layout of copy images in the 4in1 mode.
Use • To change the layout of copy images in the 4in1 mode
Setting/Procedure • The default setting is as follows:
default setting
D. Centering
Functions • To select whether to center the image with respect to the paper.
Use • To select not to allow the image to center in the paper when the paper is larger
• Use when the size of the original is smaller than that of the paper selected for
Setting/Procedure The default setting is Yes.
3.7.3 3/3
A. Priority Output tray
Functions • Set the priority output tray for each of the copier print, PC print, and the Internet
✽ When the FS-501 is mounted.
Use • To change the output tray according to the application
Setting/Procedure • The default settings are as follows (as set with the corresponding number shown
Copy
Print (PC print) : 2 (Elevator Tray)
Internet
✽ When the JS-601 is mounted : Internet default settings is 3
B. Priority Device
Functions • To set the print timing for the PC print jobs received.
Use • To have one page each printed for a PC print job
Setting/Procedure • The default setting is Printer.
Copier : After the reception of all data
Printer : After the reception of data for each page
3-12
1 2
3 4
than the original
use.
Yes No
Fax print.
on the display).
: 2 (Elevator Tray)
: 2 (Elevator Tray)
bizhub C350 Field Service Ver2.0 Sep. 2004
1 3
2 4