Ii Maintenance; Checking The Controller Firmware Version; Firmware Rewriting; Preparations For Updating The Firmware - Konica Minolta bizhub C350 Service Manual

Standard Controller Field Service Ver2.0 Sep. 2004 Checking the controller firmware version

II Maintenance

1.

Checking the controller firmware version

• The version of the controller firmware can be checked on the control panel of the
machine.
1. Call the Tech. Rep. Mode to the screen.
2. Touch [ROM Version].
3. Touch [2].
4. Check the versions of the following.
Controller
DSS
DPS
Demo Page
2.

Firmware rewriting

2.1

Preparations for updating the firmware

2.1.1

Service environment

• OS: Windows2000
• Drive which enables writing/reading of Compact flash
• Compact flash (with 64MB or more)
2.1.2

Application to be used

• Cygwin (Free software)
2.1.3

Installing the Cygwin

• The software for writing the Firmware into Compact flash is installed into the PC.
1. Execute the "setup.exe" of the CD-ROM in which Cygwin has been stored to start the
1
installation sequence.
NOTES
• Except for the selection of "Install from Local Directory", carry out installing
according to the instruction from Installer during installing.
• Check that the destination for Cygwin installation is "c:\cygwin."
1
• Check that the source data for installation is the "cygwin" folder in CD drive.
2. After installing, open the Property of "My Computer", and click the "Environment Vari-
ables" of "Advanced" tab.
NM
MIO
MIOM
Font
2-1