Konica Minolta bizhub C350 Service Manual page 187

TECH. REP. MODE
C. CD-Mag
Functions • To adjust the zoom ratio in the CD direction for the Scanner Section
Use • The CCD Unit has been replaced.
Adjustment
Specification
Adjustment If the specified width on the copy is less than 199 mm, increase the setting.
Instructions If the specified width on the copy exceeds 201 mm, decrease the setting.
Adjustment 1. Call the Tech. Rep. Mode to the screen.
2. Touch these keys in this order: "Machine Adjust" → "IR Area."
Procedure
3. Position the Color Chart correctly so that the original reference point is aligned with
the scale.
4. Press the Start key to make a copy.
5. Check point C on the image of the copy.
6. If the image falls outside the specified range, touch "CD-Mag."
7. Change the setting using the Up/Down key.
8. Press the Start key to make another copy.
9. Check the image on the copy to see if the specifications are met.
10.Make adjustments until the specifications are met.
3-52
bizhub C350 Field Service Ver2.0 Sep. 2004
•Adjust so that width C on the sample copy
made falls within the specified range.
•An adjustment must have been completed
correctly of "Zoom for FD" of PRT Area.
C
Specifications
C : 200 ± 1.0 mm
CD-Mag Setting Range
4036fs3021c0
0.990 to 1.010 (in 0.001 increments)