Winding Of The Scanner Drive Cables - Konica Minolta bizhub C350 Service Manual

Other
4.3.31

Winding of the Scanner Drive Cables

<Overall figure>
A. Reinstallation Procedure
[1]
2-68
bizhub C350 Field Service Ver2.0 Sep. 2004
<Front>
1. Position the round bead [1] of the
Scanner Drive Cable in the pulley [2]
[2]
as shown.
NOTE
• Make sure that the bead snugly
rests in the slit in the pulley.
4036fs2554c0
2. Wind the fixed bead end of the cable
around the pulley five turns clock-
wise, from the rear toward the front
side.
NOTE
• Make sure that no part of the cable
rides on the other.
4036fs2555c0
4036fs2553c0