Iv Troubleshooting; Jam Display; Initial Check Items; Misfeed Display - Konica Minolta bizhub C350 Service Manual

Hide thumbs Also See for bizhub C350:

Table of Contents

PC-101/PC-201 Field Service Ver2.0 Sep. 2004

IV Troubleshooting

• When a paper misfeed occurs, first perform the following initial check items.

Does paper meet product specifications?

Is the paper curled, wavy, or damp?

Is a foreign object present along the paper path, or is the

paper path deformed or worn?

Are the Paper Separator Fingers dirty, deformed, or

Are rolls/rollers dirty, deformed, or worn?

Are the Edge Guide and Trailing Edge Stop at the cor-

rect position to accommodate the paper?

Are the actuators operating correctly?

• When misfeed occurs, message, misfeed location "Blinking" and paper location "Light-

ing" are displayed on the Touch Panel of the main unit.

Misfeed location

Tray 3 Paper Take-Up Section

Tray 4 Paper Take-Up Section

• Open the corresponding door, clear the sheet of paper misfeed, and close the door.

Replace paper.

Instruct the user on the correct paper storage

Clean the paper path and replace if neces-

Clean or replace the defective Paper Separa-

Clean or replace the defective roll/roller.

Set as necessary.

Correct or replace the defective actuator.

Misfeed access location

Table of Contents