Konica Minolta bizhub C350 Service Manual page 153

Utility Mode
(5) Box Function
Functions • To select whether or not to use the Box function
Use • To prohibit the use of the Box function
Setting/Procedure • The default setting is Prohibit.
C. 3/4
(1) Date & Time Setting
Functions • To set the time-of-day, date, and time zone and start the clock.
Use • To change the settings for time-of-day and date
• Use as part of setup procedures.
Setting/Procedure • The default setting is 00:00, January 1, 2000.
• For the time zone, set the time difference from the Greenwich Mean Time.
• The time zone can be set between -1200 and +1200 (in 30 minute intervals).
(2) Reprint
Functions • To select whether to permit recalling and copying of image data which has previ-
Use • To prohibit Reprint
Setting/Procedure • The default setting is Yes.
(3) HDD Lock
Functions • To select whether or not to use the HDD Lock function and, if selected to use, set
• The contents of the hard disk mounted in the machine are locked using the
✽ If HDD Lock has previously been set, this function is used to change the pass-
Use • To use the HDD Lock function
Setting/Procedure • The default setting is No.
✽ By selecting the "HDD Lock" function when the hard disk is already locked, the
password can be changed or the lock setting for the hard disk can be removed.
(4) Administrator Code Change
Functions • To change the Administrator Code
Use • To change the Administrator Code required for entering the Admin. Mode
Setting/Procedure • Use the 10-Key Pad to enter the new Administrator Code. 8 digits (0 to 9)
3-18
Box function: Stores image data in the hard disk box for later use
Permit Prohibit
ously been subjected to a copy cycle.
Yes No
the password
password.
word or unlock HDD Lock.
Yes No
bizhub C350 Field Service Ver2.0 Sep. 2004