Saddle Section - Konica Minolta bizhub C350 Service Manual

FS-601 Field Service Ver2.0 Sep. 2004
[29]
[31]
[33]
[34]
[35]
1.3.11

Saddle Section

[2]
[4]
[28]
[27]
4583fs2512c0
[30]
[32]
4583fs2513c0
[36]
[37]
[38]
4583fs2514c0
[5]
[3]
[2]
[1]
4583fs2544c0
16. Set the Timing Belt [27] to the Gear
[28] and Gear [29] with the Gear and
the Cam in the fixed condition.
17. Install the Staple Position Confirm
Gear [32] in such a way that the blue
mark [30] of the Gear comes face to
face with the hole [31] in the frame.
NOTE
• The position in which the blue mark
meets face to face with the hole is
the home position for stapling. If
the Staple Jam Release Gear is
turned for some reason, this home
position will shift and the Staple
Cartridge will not come off. In this
case, the Staple Position Confirm
Gear plays a role of resuming the
stapling home position by referring
to the blue mark. Therefore, the
Gear should be set in place cor-
rectly.
18. Remove the pin fixing the Gear and
the Cam to release them.
19. Set the spring [33], the spacer [34],
the Staple Jam Release Gear [35],
the Timing Belt [36] and the Middle
Gear 1 [37], and fix them with two E-
Rings [38].
1. Remove the Front Cover.
☞ 2-3
2. Remove the Rear Cover.
☞ 2-3
3. Open the Jam Access Cover [1],
remove two screws [2], and remove
the Right Stay [3].
4. Remove two screws [4], and remove
the Lever [5].
Other
2-9