Specifying Netware Print Services - Oce CS2436 User Manual

Network Setting (CS2436-9)
9. 2. 5.
Network Setting > Network Setting (Windows) >

Specifying NetWare Print Services

Before printing in a NetWare network, you must configure print services such as print servers,
print queues, and so on. You can configure the print service settings from a computer using any of
the following Novell software provided with NetWare.
NWADMIN
●
PCONSOLE
●
Important
If you use NWADMIN to configure the print service settings, Novell Client
(the Novell NetWare client software) must be installed as the client software
application.
NetWare networking is unsupported in Windows Vista and Windows Server
2008.
This topic gives instructions for configuring NetWare print services. The order of this procedure
may vary depending on the environment.
Choosing the type of print services
Before completing print service settings, choose the type of print service. Refer to the following
descriptions as needed.
Note
In NetWare 5.1 or 6.0, NDPS may also be used as the print service. If you
use NDPS, use the Novell printer gateway included with NetWare. For details
on configuring NDPS, refer to the NetWare documentation.
NDS (Novell Directory Service) and bindery
●
NDS and bindery are both supported. Use the mode that is compatible with your network
environment.
Queue server mode and remote printer mode
●
Queue server mode and remote printer mode are both supported.
Queue server mode
●
When using queue server mode, all print server functions are supported, so there
is no need for other print server software or hardware. In NDS queue server mode
(NDS PServer), the NDS print server is used for printing. In bindery queue server
mode (Bindery PServer), the bindery print server is used for printing. Note that if
you use queue server mode, a NetWare user license is required for each network
interface.
Remote printer mode
●