Cleaning Inside The Top Cover - Oce CS2436 User Manual

Maintenance (CS2436-10)
10. 4. 2.
Maintenance > Cleaning the Printer >

Cleaning Inside the Top Cover

Clean inside the Top Cover about once a month to maintain better printing quality and help
prevent problems.
Also clean inside the Top Cover in the following situations to ensure optimal operation.
If the printed surface or the underside of paper is dirty after printing
●
After you have used up a roll
●
After borderless printing
●
After printing on small paper
●
After printing on paper that generates a lot of cutting debris
●
If you have replaced the roll
●
After printing on paper that generates a lot of paper dust
●
After printing on adhesive paper
●
Important
If the Platen inside the Top Cover becomes dirty, it may soil the underside
of paper. We recommend cleaning the Platen after borderless printing or
printing on small paper.
If the Ejection Guide is dirty, it may soil the edge of the paper when the
paper is cut. We recommend cleaning the Ejection Guide even if it does not
appear dirty, because it may actually be covered with paper dust.
Printing on adhesive paper may leave adhesive on the Platen, Paper
Retainer, or other parts. To prevent paper jams, we recommend cleaning
inside the Top Cover after printing.
1.
Open the Top Cover.
2.
If paper dust has accumulated in the Vacuum holes (a) on the Platen or in the Borderless
Printing Ink Grooves (b), use the Cleaning Brush (c), provided with the printer, to wipe it
away.