Oce CS2436 User Manual page 534

Printer Parts (CS2436-8)
Interface Print
Return Defaults
Sleep Timer
Buzzer
Contrast Adj.
Date & Time
Date Format
Language
Time Zone
Length Unit
Detect Mismatch
Paper Size Basis
System
Comm.Mode
Ethernet Type
Spanning Tree
MAC Address
Date
Time
Roll Selection 1
Roll Selection 2
Choose the LAN communication
method.
Choose the LAN transfer rate.
Choose whether spanning-tree
packets are supported over the LAN.
Indicates the MAC address.
Print interface settings information.
Choose OK to restore Interface
Setup settings to the default values.
Specify the period before the printer
enters sleep mode.
Choose On for the buzzer to sound in
case of errors.
Adjust the Display Screen contrast
level.
Set the current date.
Set the current time. Available only if
the Date setting is specified.
Specify the date format.
Specify the language used on the
Display Screen.
Specify the time zone. Time zone
options indicate a main city in this
time zone and the difference from
Greenwich Mean Time.
Choose the unit of measurement
when roll length is displayed. Change
the unit displayed for the remaining
amount of roll paper.
Specify printing behavior if the type
and size of paper specified in the
printer menu does not match the type
and size in the printer driver.
Choose Pause to have printing
paused under these circumstances.
Choose Warning to continue printing
after notification. Choose None to
continue printing without notification.
If roll size detection is activated,
choose whether ISO A3 (297mm) or
300mm Roll is applied when a roll of
an intermediate width is detected.
If roll size detection is activated,
choose whether 10in. (254mm) or
JIS B4 (257mm) is applied when a
roll of an intermediate width is
detected.