Replotting With Hp-Gl/2 Jobs Is Not Possible - Oce CS2436 User Manual

Troubleshooting (CS2436-11)
11. 8. 9.
Troubleshooting > HP-GL/2 problems >

Replotting with HP-GL/2 jobs is not possible.

Cause
The data was lost because of
replotting.
Corrective Action
Data for replotting is lost after the
following operations. In this case, send
the print job again.
The memory buffer was cleared
from the Control Panel.
The printer was turned off.
The printer has received a new HP-
GL/2 print job.
Printing has been canceled