Attaching The Roll Holder To Rolls - Oce CS2436 User Manual

Handling Paper (CS2436-6)
6. 2. 1.
Handling Paper > Handling rolls >

Attaching the Roll Holder to Rolls

When printing on rolls, attach the Roll Holder to the roll.
Rolls have a two- or three-inch paper core. Use the correct attachment for the paper core. The printer comes
equipped with the 2-Inch Paper Core Attachment installed.
Using Rolls with a 2-Inch Paper
Core
Holder Stopper
(Left Side)
2-Inch Paper Core
Attachment
Caution
Set the roll on a table or other flat surface so that it does not roll or fall. Rolls are heavy,
and dropping a roll may cause injury.
Important
When handling the roll, be careful not to soil the printing surface. This may affect the
printing quality. We recommend wearing clean cloth gloves when handling rolls to protect
the printing surface.
Use scissors or a cutting tool to cut the edge of the roll paper if it is uneven, dirty, or has
tape residue. Otherwise, it may cause feeding problems and affect the printing quality. Be
careful not to cut through any barcodes printed on the roll.
Align the edges of the paper on both ends of the roll. Misalignment may cause feeding
problems.
Note
Using Rolls with a 3-Inch Paper Core
Roll Holder
Holder Stopper (Left Side) Roll Holder (Right Side)
(Right Side)
3-Inch Paper Core
Attachment L
No
Attachment
Needed
3-Inch Paper Core
Attachment R