Paper Cutting Failed - Oce CS2436 User Manual

Error Message (CS2436-12)
12. 1. 31.
Error Message > Error Messages >

Paper cutting failed.

Cause
There are sheets left on the
Ejection Guide.
There is a foreign object by
the Output Tray, obstructing
the Cutter Unit.
You are not using the printer
under the recommended
environmental conditions for
the paper.
Corrective Action
1. Push the Release Lever back and
remove the paper.
2. Load the paper.
3. Pull the Release Lever forward.
4. If "Not finished printing. Finish
printing remaining jobs?" is shown
on the Display Screen, press the OK
button.
Printing will resume, starting from the
page on which the error occurred.
(See "Loading Rolls in the
Printer (6.2.2).")
1. Lift the Top Cover and remove the
foreign object.
2. If "Not finished printing. Finish
printing remaining jobs?" is shown
on the Display Screen, press the OK
button.
Printing will resume, starting from the
page on which the error occurred.
Use the printer only where the
recommended environmental conditions
for the paper are met. Note that various
environmental conditions are
recommended for various types of paper.
For details on the recommended
environmental conditions for paper (See
"Types of Paper (6.1.1).")