Oce CS2436 User Manual page 791

Error Message (CS2436-12)
12. 1. 49.
Error Message > Error Messages >
The paper is too small.
"Replace paper with A4/LTR (vertical) or larger"
Cause
The loaded paper
is too small.
"Replace roll with 10 in. wide or larger roll."
Cause
The loaded paper
is too small.
"Remove paper and check pap. size"
Cause
Corrective Action
Replace the paper with paper of A4/Letter (vertical)
size or larger as follows.
1. Press or
the OK button, and remove the paper.
(See "Removing Sheets (6.3.4).")
2. Switch to paper A4/Letter (vertical) or larger.
(See "Loading and Printing on Sheets (1.1.3).")
The printer will resume printing.
to select Stop Printing, and then
Press or
press the OK button.
Corrective Action
Replace the roll with a roll 10 inches in width or
larger as follows.
1. Press or
then press the OK button.
(See "Removing the Roll from the
Printer (6.2.6).")
(See "Removing the Roll Holder from
Rolls (6.2.7).")
2. Replace the roll with a roll 10 inches wide or
larger.
(See "Attaching the Roll Holder to Rolls (6.2.1).")
(See "Loading Rolls in the Printer (6.2.2).")
The printer will resume printing.
to select Stop Printing, and then
Press or
press the OK button.
to select Change Paper, press
to select Change Paper, and
Corrective Action