Configuring The Ip Address Using The Printer Control Panel - Oce CS2436 User Manual

Table of Contents

Advertisement

Network Setting (CS2436-9)
9. 1. 4.
Network Setting > Network Setting >

Configuring the IP Address Using the Printer Control Panel

This topic describes how to configure the printer's IP address on the Control Panel.
1.
On the Tab Selection screen of the Control Panel, press
Adj. tab (
2.
Press the OK button.
The Set./Adj. Menu is displayed.
3.
Press
4.
Press
5.
Press
6.
Press
7.
Press
8.
After you press
9.
Press the
10.
Repeat steps 8 and 9 to complete the settings, and then press the OK button.
).
Note
If the Tab Selection screen is not displayed, press the Menu
button.
to select Interface Setup, and then press the OK button.
or
to select TCP/IP, and then press the OK button.
or
to select IPv4, and then press the OK button.
or
or
to select IPv4 Settings, and then press the OK button.
to select IP Address, and then press the OK button.
or
or
to select the input field, numerical input is possible.
or
button to enter the value.
Note
Pressing the
value is 9, after which 0 is displayed.
Pressing the
value is 0, after which 9 is displayed.
Hold down
or
Make sure the IP address you enter for the printer is not the same as
any computer IP address in your network.
button increases the number by 1. The maximum
button decreases the number by 1. The minimum
to increase or decrease the value continuously.
or
to select the Settings/

Advertisement

Table of Contents
loading

Table of Contents