Using Remoteui - Oce CS2436 User Manual

Network Setting (CS2436-9)
9. 1. 7.
Network Setting > Network Setting >

Using RemoteUI

Enter the printer's IP address in a web browser to display the RemoteUI page. After you log on to
RemoteUI from the page, you can check and change the status of the printer and print jobs, and
configure network settings.
To access RemoteUI, start the web browser and enter the following URL in the Location (or
Address ) box to display the RemoteUI page.
http://printer IP address or name/
Example: http://xxx.xxx.xxx.xxx/
For details on configuring printer settings for networks, refer to the following topics.
Configuring the Printer's TCP/IP Network Settings (9.1.8)
●
Configuring the Printer's AppleTalk Network Settings (9.1.9)
●
Configuring the Printer's NetWare Network Settings (9.1.10)
●
Specifying Printer-Related Information (9.1.11)
●
Note
RemoteUI also offers many other features. You can display the ink levels,
check error messages and other status information, and cancel print jobs.
By factory default, the English screen is displayed. To change the display
language, select the desired language under Language before logging on in
administrator mode.
Important
Use Netscape Navigator 6.0 or later, Internet Explorer 5.01 or later, or
Firefox 1.5 or later as a web browser. In Mac OS X, you can also use Safari
1.32 or later or Safari 2.03 or later.
Access is not possible via a proxy server. In environments where a proxy
server is used, add the printer's IP address to Exceptions (addresses
accessed without a proxy server) in the web browser proxy server settings.
(Settings may vary depending on the network environment.)
Enable JavaScript and cookies in the web browser.
If you access RemoteUI with the printer name instead of its IP address,
make sure the DNS settings are correctly configured.