Troubleshooting (CS2436-11)
11. 2. 6.
Troubleshooting > Problems Regarding Paper >
Paper is not cut straight
Cause
The paper is bent or
curled at the cut position.
Paper rises by the ends of
the cut position before it
is cut.
You are using paper that
cannot be cut with the
Cutter Unit.
Corrective Action
Straighten out any curling by the edges of the
paper.
Reload the paper correctly.
Specify Manual in Cutting Mode in the
Control Panel menu and use scissors or a
cutting tool to cut the roll after printing.
(See "Specifying the Cutting Method for
Rolls (6.2.13).")