Cutting Roll Paper After Printing (Mac Os X) - Oce CS2436 User Manual

Enhanced Printing Options (CS2436-3)
3. 10. 10.
Enhanced Printing Options > Other useful settings >

Cutting Roll Paper After Printing (Mac OS X)

This topic describes how to cut roll paper automatically after printing (using the auto cut function), as
well as how to print a cut line for manual cutting.
Note
The auto cut function is activated on the printer by default and when the printer
driver is installed. Follow the steps below to reactivate the function if it is disabled,
or to select the setting for printing a cut line instead.
1.
This sets the
Note
B C
Format for and
The configuration method varies depending on the OS and application software
you are using.
If Page Setup is displayed in the application menu, the settings are configured by
opening the Page Attributes dialog box from Page Setup.
If it is not displayed, the settings are configured in the upper part of the printer
driver displayed when you select Print from the application software menu.
Paper Size.