Frequently Asked Questions - Oce CS2436 User Manual

Troubleshooting (CS2436-11)
11. 1. 1.
Troubleshooting > Frequently Asked Questions >

Frequently Asked Questions

This section presents frequently asked questions and answers. To view more detailed
explanations, click the hyperlinks in the answer column.
Question
How do I print on a roll?
How do I print on a sheet?
How do I switch between
printing on rolls and sheets?
How do I change the paper
type or size?
How do I cut the roll paper
after printing?
Answer
When printing on rolls, after loading the
roll, specify the paper type and length, both
on the Control Panel and in the printer
driver.
⇒"Loading and Printing on Rolls (1.1.2)"
When printing on sheets, specify the paper
type and size in the printer driver before
loading the paper.
⇒"Loading and Printing on Sheets (1.1.3)"
When you complete operations on the
Control Panel to load or replace paper, the
paper source is automatically switched to
the selected paper.
⇒"Loading Rolls in the Printer (6.2.2)"
⇒"Loading Sheets in the Printer (6.3.1)"
Specify the type and size of paper, both on
the Control Panel and in the printer driver.
Specifying it in the printer driver
⇒"Specifying Paper in the Printer
Driver (3.2.3)"
Specifying it on the Control Panel
Selecting the paper type
⇒"Changing the Type of Paper (6.2.3)"
Selecting the paper size
⇒"Specifying the Paper Length (6.2.4)"
You can wait until ink dries before cutting
the roll, and you can cut rolls at a desired
position.
⇒"Specifying the Cutting Method for
Rolls (6.2.13)"