Configuring The Destination For Appletalk Networks - Oce CS2436 User Manual

Network Setting (CS2436-9)
9. 3. 3.
Network Setting > Network Setting (Mac OS X) >

Configuring the Destination for AppleTalk Networks

To print over an AppleTalk network, activate the AppleTalk protocol and configure the destination
as follows.
Activating AppleTalk on the printer
Important
By factory default, the AppleTalk protocol is disabled on the printer.
1.
On the Tab Selection screen of the Control Panel, press
Adj. tab (
2.
Press the OK button.
The Set./Adj. Menu is displayed.
3.
Press
4.
Press
5.
Press
6.
Press the Menu button.
If any of the settings is changed, a confirmation message is displayed. In this case, press
the OK button.
).
Note
If the Tab Selection screen is not displayed, press the Menu
button.
or to select Interface Setup, and then press the OK button.
to select AppleTalk, and then press the OK button.
or
to select On, and then press the OK button.
or
or to select the Settings/