Configuring Tcp/Ipv6 Network Settings - Oce CS2436 User Manual

Network Setting (CS2436-9)
9. 1. 6.
Network Setting > Network Setting >

Configuring TCP/IPv6 Network Settings

When printing in a TCP/IPv6 network, you must configure the TCP/IPv6 settings on the Control
Panel.
Follow the steps below to configure the TCP/IPv6 network settings.
1.
On the Tab Selection screen of the Control Panel, press
Adj. tab (
2.
Press the OK button.
The Set./Adj. Menu is displayed.
3.
Press
4.
Press
5.
Press
6.
Press
7.
Press
Important
Once you set IPv6 Support to On, the IPv6 StlessAddrs setting takes
effect.
You can also configure IPv6 StlessAddrs and DHCPv6 from the printer
Control Panel.
).
Note
If the Tab Selection screen is not displayed, press the Menu
button.
or to select Interface Setup, and then press the OK button.
to select TCP/IP, and then press the OK button.
or
to select IPv6, and then press the OK button.
or
or to select IPv6 Support, and then press the OK button.
or to select On, and then press the OK button.
or to select the Settings/