Oce CS2436 User Manual page 802

Error Message (CS2436-12)
12. 2. 1.
Error Message > Messages regarding paper >
MediaType Mismatch
Cause
When Detect Mismatch
in the Control Panel menu
is set to Pause, the type
of paper loaded does not
match the type specified
in the printer driver.
You tried to print a test
pattern for printer
adjustment on several
sheets, but sheets of
different types of paper
were used.
When Detect Mismatch
in the Control Panel menu
is set to Warning, the
type of paper loaded does
not match the type
specified in the printer
driver.
Corrective Action
Follow these steps to ensure the paper type
matches on the printer and in the printer
driver.
1. Press or
and then press the OK button.
2. Either change the type of paper
specified in the printer driver settings or
replace the loaded paper and change the
paper type setting on the printer.
(See "Loading and Printing on
Rolls (1.1.2).")
(See "Loading and Printing on
Sheets (1.1.3).")
When printing a test pattern for adjustment,
use sheets of the same type of paper, in the
required quantity. Replace the paper as
follows and perform adjustment again.
1. Press
or
and then press the OK button.
2. Replace the paper.
(See "Loading and Printing on
Sheets (1.1.3).")
3. Execute adjustment again from the
control panel menu.
to select Print, and then press
Press or
the OK button to resume printing.
However, note that this error may cause
paper jams and affect the printing quality.
You can continue to print, but note that this
error may cause problems in the printing
results.
to select Stop Printing,
to select Stop Printing,