Oce CS2436 User Manual page 413

Handling Paper (CS2436-6)
3.
With the edge of the roll paper facing forward as shown, insert the Roll Holder from the right of the roll.
Insert it firmly until the roll touches the flange (a) of the Roll Holder, leaving no gap.
4.
Insert the Holder Stopper from the left in the Roll Holder as shown. Holding it at the position shown (b),
push it firmly in until the flange (a) of the Holder Stopper touches the roll. Lock the Holder Stopper lever
(c) by pushing it down toward the shaft side.
Align the tips (a) of the 3-Inch
Paper Core Attachment L with the
holes (b) of the Holder Stopper and
insert it firmly.
Align the tips (a) of 3-Inch Paper
Core Attachment R with the holes
(b) of the Roll Holder and insert it
firmly.