Oce CS2436 User Manual page 601

Network Setting (CS2436-9)
9. 3. 2.
Network Setting > Network Setting (Mac OS X) >
Configuring the Printer's AppleTalk Network Settings
Follow the steps below to configure the AppleTalk network settings.
1.
Start the web browser and enter the following URL in the Location (or Address ) box to
display the RemoteUI page.
http://printer IP address or name/
Example: http://xxx.xxx.xxx.xxx/
2.
Select Administrator Mode and click Logon.
3.
If a password has been set on the printer, enter the password.
4.
Click Network in the Device Manager menu at left to display the Network page.
5.
Click Edit in the upper-right corner of the AppleTalk group to display the Edit AppleTalk
Protocol Settings page.
6.
Refer to the AppleTalk Settings Items table to complete the settings.
AppleTalk Settings Items
Item Details
Specify whether to use
AppleTalk.
If you will use AppleTalk,
Phase Type
choose Phase 2.
If you will not use AppleTalk,
choose Disabled.
Specify the object name used
by AppleTalk (in up to 31
single-byte or 15 double-byte
Name (*1) characters).
However, do not use the
following single-byte
characters: @, *, :, and =.
Specify the printer zone
name, up to 31 single-byte
characters.
However, do not use the
Zone (*2)
following single-byte
characters: Also avoid using *
(which represents the default
zone) in the middle of a
string.
Default Setting
Disabled
Océ NB-18GB (xxxxxx)
*