Oce CS2436 User Manual page 632

Maintenance (CS2436-10)
7.
While firmly holding the Printhead you have removed, use your other hand to remove the
orange Protective Part (a). Squeeze the grips (c) of Protective Part (b) and pull it down to
remove it.
Important
When handling the Printhead, always hold it by the grips (a). Never
touch the nozzles (b) or metal contacts (c). This may damage the
Printhead and affect printing quality.
Never touch the ink supply section (d). This may cause printing
problems.
If you need to put a Printhead somewhere temporarily before
installation, do not keep the nozzles and metal contacts facing down. If
the nozzles or metal contacts are damaged, it may affect the printing
quality.
The inside surface of the Protective Part (a) and Protective Part (b) is
coated with ink to protect the nozzles. Be careful not to touch these
surfaces when removing the caps.
The Printhead contains ink to protect the nozzles. We recommend
removing Protective Part (b) as you hold it over the Printhead package
or safely out of the way to avoid spilling ink and staining your clothes
or the surrounding area. If ink accidentally spills, wipe off the ink with
a dry cloth.
Do not reattach the Protective Part or protective material. Dispose of
these materials in accordance with local regulations.