Keeping Track Of The Amount Of Roll Paper Left - Oce CS2436 User Manual

Handling Paper (CS2436-6)
6. 2. 11.
Handling Paper > Handling rolls >

Keeping Track of the Amount of Roll Paper Left

Setting ManageRemainRoll to On in the Paper Menu of the Control Panel will print a barcode with text on
the roll when the roll is removed that identifies the type of paper and amount left. When ManageRemainRoll
is On and you load rolls with printed barcodes, the type of paper and amount left are automatically detected
after rolls are loaded. The barcode will be cut off after it has been read.
Important
Because the ManageRemainRoll function is not compatible with clear film, an error
message may be displayed ( "The roll is empty." ) after you load clear film. For this
reason, set ManageRemainRoll to Off before loading clear film.
If the barcode on the roll is not detected, enter the type and length of paper on the
Control Panel.
Follow these steps to set ManageRemainRoll to On as follows.
1.
On the Tab Selection screen of the Control Panel, press
Note
2.
Press the OK button.
The Paper Menu is displayed.
3.
Press or
4.
Press or
If the Tab Selection screen is not displayed, press the Menu button.
to select ManageRemainRoll, and then press the OK button.
to select On, and then press the OK button.
or to select the Paper tab ( ).