The Back Side Of The Paper Is Dirty - Oce CS2436 User Manual

Troubleshooting (CS2436-11)
11. 5. 5.
Troubleshooting > Problems with the printing quality >

The back side of the paper is dirty

Cause
The Platen has become
dirty after borderless
printing or printing on
small paper.
The Platen has become
soiled because you have
set Width Detection to
Off in the Control Panel
menu.
The Paper Retainer is
soiled.
Corrective Action
Open the Top Cover and clean the Platen.
(See "Cleaning Inside the Top
Cover (10.4.2).")
Set Width Detection to On in the Control
Panel menu, and then open the Top Cover
and clean the Platen.
(See "Cleaning Inside the Top
Cover (10.4.2).")
Open the Top Cover and clean the Platen.
After this, manually advance the roll onto the
Platen before printing.
(See "Cleaning Inside the Top
Cover (10.4.2).")
(See "Feeding Roll Paper Manually (6.2.10).")
Clean the Paper Retainer.
(See "Cleaning Inside the Top
Cover (10.4.2).")