Cleaning The Printhead - Oce CS2436 User Manual

Maintenance (CS2436-10)
10. 2. 3.
Maintenance > Printheads >

Cleaning the Printhead

If printing is faint, cleaning the Printhead may improve results.
Choose one of two Printhead cleaning modes ( Head Cleaning A or Head Cleaning B ),
depending on the problem to resolve.
Head Cleaning A
●
Use this mode if printing is faint or contains foreign substances. This method of cleaning
consumes the least amount of ink.
It takes about three and a half minutes to complete.
Head Cleaning B
●
Use this mode if no ink is ejected at all, or if Head Cleaning A does not solve the
problem.
It takes about four minutes to complete.
Caution
Do not remove the Maintenance Cartridge or ink tanks during either Head
Cleaning A or Head Cleaning B.
Note
If printing does not improve after Head Cleaning B, try repeating Head
Cleaning B once or twice. If this still does not improve printing, the
Printhead may have reached the end of its useful life. Contact your Océ
dealer for assistance.
Nozzles are periodically checked to ensure they are clear. Configure the
settings on the Control Panel menu in Nozzle Check. (See "Menu
Settings (8.2.8).")
Perform cleaning as follows.
1.
On the Tab Selection screen of the Control Panel, press
Adj. tab ( ).
or to select the Settings/