Specifying The Paper Length - Oce CS2436 User Manual

Handling Paper (CS2436-6)
6. 2. 4.
Handling Paper > Handling rolls >

Specifying the Paper Length

When changing the length of paper after the paper has been advanced, specify the length as follows.
Note
Specify the paper length when you have set ManageRemainRoll to On. (See "Keeping
Track of the Amount of Roll Paper Left (6.2.11).")
1.
On the Tab Selection screen of the Control Panel, press
Note
2.
Press the OK button.
The Paper Menu is displayed.
3.
Press or
4.
Press or
5.
Press or
Specify the roll length as follows.
1.
Press the
2.
Press the
3.
Repeat steps 1 and 2 to finish entering the value, and then press the OK button.
If the Tab Selection screen is not displayed, press the Menu button.
to select Chg. Paper Size, and then press the OK button.
to select Roll Length, and then press the OK button.
to select the length of paper loaded in the printer, and then press the OK button.
or button to move to the next field for input.
or button to enter the value.
or to select the Paper tab ( ).