Loading Sheets In The Printer - Oce CS2436 User Manual

Handling Paper (CS2436-6)
6. 3. 1.
Handling Paper > Handling sheets >

Loading Sheets in the Printer

Follow these steps to load sheets in the printer.
Important
One sheet of paper can be loaded in the Paper Feed Slot at a time. Do not load more
than one sheet at a time. This may cause paper jams.
Before feeding paper or printing, make sure the sheet is flat against the Roll Cover. The
sheet may jam if it curls before feeding or printing and the trailing edge drops toward the
front.
Note
Store unused paper in the original package, away from high temperature, humidity, and
direct sunlight.
Paper that is wrinkled or warped may jam. If necessary, straighten the paper and reload
it.
Load the paper straight. Loading paper askew will cause an error.
1.
Select sheets as the paper source.
If a print job was received
●
Sheets are automatically selected, and the media type and size specified by the print job are
shown on the Display Screen. Go to the next step.
If no print job was received
●
1.
Press
Note
If any paper has been advanced that will not be used, a message is shown requesting
you to remove it.
Press
the next step.
Slide the Width Guide (a) to align it with the mark for the size of paper you will load.
●
Press the Load button.
to select Load Cut Sheet, and then press the OK button.
or
or to select "Yes", and then press the OK button. Remove the paper and go to